SETTING BASIC DATA
11
SELECTION OF SEED SIZE AND SHAPE
In order to reach more precise seed detection when using DS 2000
optomodules, main seed characteristics like size and shape must be entered. It
brings more efficiency in recognition of double or triple seed drops.
Changes made in this menu are followed by a system test.
EDITING ROW SKIP
In case rows equipped with photosensors are temporarily not in use,
continuous alarm can be embarrasing. To eliminate this problem, switch off
control in that row.
After system test all connected sensors are displayed (regardless of being
switched on or off).
However, skipped rows are not involved in seeding control and are indicated
by a (
.
) character.
SEEDING ROW DISPLAY SETTING
Enhanced visibility can be reached by doubling the distances of the displayed
seed sensors on screen (up to 8 rows).
If seeder has more than 8 rows, a short warning alarms you at expansion
attempt. This case the program automatically reset short row display.
Selection of seed shape
(round or long)
DS2000 *: 6-9mm>
DS2000/HR
DS2000/HR *: o >
Selection of seed size
(3-5 / 6-9 mm)
<
BBBHBB
..
BBBB
4>
STOP
DISPLAY
Row skip on/off
Step row
BBBBBBBBe
12345678 >
B
B
B
B
B
B
B
Bf
1 2 3 4 5 6 7 8 >
