DigiTech RP-20 VALVE Скачать руководство пользователя | Manualshive

Страница: 58 / 107

background image

the module if the dry level is turned up.

FX Level

This parameter lets you select the overall FX level mix of the Whammy Effect module. Ranges from: Off to 100%.

Dry Level

This parameter lets you select the amount of Dry signal that is included in the Whammy effect. Ranges from: Off to
100%.

Balance

This parameter allows you to pan the Dry signal either to the Right or the Left in the stereo soundfield. Ranges from
Left 99 to Right 99.

Min Shift

This parameter sets the minimum pedal shift level of the Whammy effect. Ranges from: -72 (6 octaves down), to 24 (2
octaves up).

Max Shift

This parameter set the maximum pedal shift level of the Whammy effect. Ranges from: -72 (6 octaves down), to 24 (2
octaves up).

Min Detune

This parameter sets the minimum pedal level of detune effect. Ranges from: -50% (down 50 cents), to 50% (up 50
cents).

Max Detune

This parameter sets the maximum pedal level of detune effect. Ranges from: -50% (down 50 cents), to 50% (up 50
cents).

Pedal

This parameter is used for the assignment of an expression pedal. This parameter also shows the pedal travel range.
Ranges from: 0 to 100

Out

This parameter is used to set the overall output level of the Whammy module. Ranges from: 0 to 100%

Pan

This parameter is used to position the Whammy effect in the Stereo soundfield. Ranges from: Left 99 to Right 99.

Auto Wah

Break out the Bell-bottom jeans and the Disco mirror balls, because the Auto-Wah is here to play. The Auto Wah is a great effect use when you
want a nasally wah-type effect, but you don’t want to do the leg work. The Auto Wah utilizes a sensitivity detector that reads the input signal,
then simulates the action of a wah pedal.

Auto Wah Effect Parameters

Auto Wah On/Off

Turns the Auto Wah module on or off. When the module is turned off, the signal will continue to pass through the
module.

FX Level

This parameter lets you select the overall FX level mix of the Auto Wah Effect module. Ranges from: Off to 100%.

Sensitivity

This parameter adjusts the sensitivity of the detection of the automatic wah. The higher the sensitivity is set, the wider
the Wah range will be. Ranges from: Off to 100%.

Section - 4 Editing Modules

RP-20 Valve

User Guide

50

«
...
56
57
58
59
60
...
»

Содержание RP-20 VALVE












































































































Отзывы:

Нет отзывов

Похожие инструкции для RP-20 VALVE

Бренд: Raymarine Страницы: 70

Бренд: Labnet Страницы: 12

Accublock D1301

Бренд: Labnet Страницы: 13

Бренд: YMC Страницы: 49

Бренд: Octane Fitness Страницы: 8

Бренд: Octane Fitness Страницы: 10

Бренд: OCENCO Страницы: 48

Бренд: Ocean Optics Страницы: 6

Бренд: Yamaha Страницы: 39

Бренд: Yamaha Страницы: 110

Бренд: M-system Страницы: 4

Бренд: Ignis Pixel Страницы: 4

Бренд: Faro Страницы: 161

Firefly Low Voltage Lighting System

Бренд: Ultra Страницы: 2

Бренд: Lumination Страницы: 2

Бренд: Mindray Страницы: 165

Бренд: My-Doc Страницы: 32

Бренд: Spitzer LIGHTING Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды