DigiTech RP-20 VALVE, Руководство пользователя

Страница: 63 / 107

4. Now move the expression pedal to assign the pedal and the display will appear like this:
5. By pressing the <3> button, this will activate the Morph pedal parameter making it ready for assignment. Now press the <Assign>
button and the display will appear something like this:
6. Now select the Expression pedal, and the display will appear something like this:
7. In this example, the expression pedal is now assigned to morph between Solid State and Tube distortion modules. Note that -99 as the
minimum value represents the Solid State (bottom) Amp and the Maximum being 99, represents the Tube (top) distortion. To return to
Program mode, press the
<Program> button. Always remember to save any changes.
Morphing Between Effect Modules
Not only does the RP-20 Value allow you to morph between Distortion types, but it also gives you the ability to morph between effect
modules. This can be done when using Effect Configurations
6, 12 or 15 which are split configurations.
The procedure for assigning the morph pedal to the Effect modules uses the same steps as 3 through 7 of the distortion of morphing
assignment procedure.
Morph Exp 1 Min [99] Max
2
FACTORY USER
On 1
CHANGED LINK
0 2
CHANGED LINK
-99 3
CHANGED LINK
99 4
PAGE
1
OF
19
COMP WAH TUBE EQ
L/R OUTS
L/R OUTS
#
b
GATE
EQ DIST
Select a Contrl F.Switch
2
FACTORY USER
CHANGED LINK CHANGED LINK CHANGED LINK
COMP WAH TUBE EQ
L/R OUTS
L/R OUTS
#
b
GATE
EQ DIST
Vol Pd Exp1 1 Min[18]Max
2
FACTORY USER
On
1
CHANGED LINK
Pdl
2
CHANGED LINK
Off
3
CHANGED LINK
100
4
PAGE
1
OF
13
COMP WAH TUBE EQ
L/R OUTS
L/R OUTS
#
b
GATE
BANK
EQ DIST
Select a Contrl F.Switch
2
FACTORY USER
%kHz
msdB 1
1
CHANGED LINK CHANGED LINK CHANGED LINK
COMP WAH TUBE EQ
L/R OUTS
L/R OUTS
#
b
GATE
BANK
EQ DIST
RP-20 Valve
User Guide
Section - 5 Advanced Topics
55