The Rear Panel
1) Input -
This is the audio input jack for the RP-20 Valve.
2) Input Level
- This is the input control knob for the RP-20 Valve. To achieve the optimal setting for the RP-20 Valve, turn the input knob up
until the signal clip LED (3) occasionally lights when an input signal is fed into the RP-20 Valve.
3) Input Signal Clip LED
- This is the Input signal clip LED of the RP-20 Valve. When this LED lights, the input signal is too strong and should
be turned down until this LED only occasionally lights.
4) Output Level
- This is the Output level control knob, and is used for setting the overall output level of the RP-20 Valve.
5) Right Output
- This is the right output jack of the RP20 Valve.
6 Left (Mono) Output
- This is the left (Mono) audio output of the RP20 Valve. This output jack can be used as the Mono out or can be used
with the right output to produce stereo outputs.
7) Headphone Out
- This is the stereo headphone output. The headphone output level is controlled by the output level control knob
8) MIDI In
- The MIDI IN port allows the RP-20 Valve to respond to incoming MIDI information.
9) MIDI Out/Thru
- This port allows the RP-20 Valve to send out or pass MIDI data to other devices.
10) AC Line Input
- This input is used for the input of the included power supply.
Note- Use only the included PS940 power supply.
1
3
2
4
5
6
7
8
9
10
Section -1 Introduction
RP-20 Valve
User Guide
6
Содержание RP-20 VALVE
Страница 8: ...RP 20 Valve User Guide VI...
