Digital Effects
Digital Effect Section Adjustments
When editing in the digital effect section, you have the option of editing the following:
1. Digital Effects
2. Wet/Dry Mix
3. Effect Configuration
4. Effect Module Size
When you are editing the digital effect section of the RP-20 Valve, whether it be effect type, Wet/Dry Mix, Effect configuration or module size,
simply press the
<Effects>
button, which will put you in digital effect edit mode. From there continue to press the
<Effect>
button until
you reach the digital effect module that you wish to edit. Notice that the module for editing will
Flash
in the display. Once you are at the
module that you wish to edit, you can begin to use the
<Next Page>
and
<Previous>
page buttons to move you through the module.
Once you arrive at a page you wish to edit, the display will show up to 4 parameters per page. To edit one of the parameters, simply press
one of the four function buttons marked
<1-4>
to select the parameter. At this point you can scroll through that selected parameter by
turning the
<Program/Effect>
wheel. Once you have your sounds always make sure to store and press the
<Program>
button to exit the
edit mode.
The illustration below shows all of the editing tools needed for Digital Effect editing.
Data
Section - 2 Setting Up
RP-20 Valve
User Guide
14
Содержание RP-20 VALVE
Страница 8: ...RP 20 Valve User Guide VI...
