Digital Projection Titan 930, Руководство пользователя

Страница: 14 / 145

Digital Projection
M-Vision 930 Series
PROJECTOR OVERVIEW Installation and Quick-Start Guide
6 Rev A January 2014
Control panel indicators
During power on, all LED indicators become lit while the projector is
running a self test.
At the end of the self test only the
STANDBY
indicator remains lit.
When the projector goes from STANDBY to ON mode, the STANDBY
indicator is switched off and the
ON
indicator is lit.
The
ON
indicator flashes during cool down.
Indicators
1
ON
2
ERROR
3
STANDBY
Error codes
If the projector detects an error, the red ERROR indicator will flash as shown in the chart below.
For example, if the lamp door is left open, the
ERROR
indicator will flash twice followed by a pause, then the sequence will repeat until the
error condition is corrected.
Condition ERROR indicator behavior
Lamp fail Flashes once, then pauses, then repeats.
Lamp door open Flashes twice, then pauses, then repeats.
Fan failure Flashes three times, then pauses, then repeats.
Over temperature Flashes four times, then pauses, then repeats.
Filter failure Flashes five times, then pauses, then repeats.
System error On.
ENTER
ON ERROR LED STATUS STANDBY
MENU STBY
INPUT
1 3 2
Notes
During startup all LEDs light up
at the same time to indicate the
projector is carrying out a self-test.
delay
delay
delay
delay
delay