Digital Projection Titan 930, Руководство пользователя

Страница: 67 / 145

Digital Projection
M-Vision 930 Series
USING THE PROJECTOR Operating Guide
59 Rev A January 2014
Control menu
•
OSD Settings
Adjust the appearance and position of the on-screen display.
•
Blank Screen
Choose from Splash , Black , Blue and White .
•
Projection Mode
Choose from Front Tabletop , Front Ceiling , Rear Tabletop and
Rear Ceiling
.
•
Auto Power Off
Set this to
On
if you want the projector to go into
Standby
mode when no
input source is detected for 20 minutes.
•
Auto Power On
•
Set this to On if you want the projector to start up immediately when the
mains is connected.
•
Set this to
Off
if you want the projector to go into
Standby
mode when
the mains is connected. In this case, the projector will not start up until the
POWER
button is pressed on the control panel or the remote control.
•
Startup Splash
Set this to
On
if you want the DP logo to show when the projector is first
switched on.
•
Trigger1
and
Trigger 2
Choose from
Screen
,
16:9
,
TheaterScope
,
4:3
,
4:3 Narrow
or
RS232
to
determine what will cause each trigger output to activate.
•
Auto-Source
If this setting is
On
, the projector will automatically search for an input source
in case its current input is disconnected.
•
Infrared Remote
Switch the remote control on and off.
•
RS232 Control
•
Set this to
Projector RS232
if you want to use the RS232 port for RS232
connection.
•
Set to HDBaseT RS232 if you want to use the HDBaseT port for RS232
connection.
Notes
If you turn the remote control off,
you can only turn it back on again
from the control panel.
CONTROL >>
Select Item
[Enter] Execute
[Menu] Return
Blank Screen
Projection Mode
Auto Power Off
Auto Power On
Startup Splash
OSD Settings
Splash
Front Tabletop
Off
Off
On
< Enter >
Trigger 1 Screen
Trigger 2
Auto Source
Infrared Remote
RS232 Control Screen
Off
On
Projector RS232
Network < Enter >