Digital Projection Titan 930, Руководство пользователя

Страница: 26 / 145

Digital Projection
M-Vision 930 Series
OPERATING THE PROJECTOR Installation and Quick-Start Guide
18 Rev A January 2014
Selecting an input signal or test pattern
Input signal
•
Connect an image source to the projector. The signal should be automatically detected by the projector, and should be displayed within
two or three seconds.
•
If more than one signal is connected, then select the input you want to display:
•
Press one of the input buttons on the remote control, or
•
Open the On-screen display (OSD) by pressing
MENU
. Highlight
Input Select
from the
Main
menu, then select an input signal
using the
LEFT
and
RIGHT
arrow buttons.
Test pattern
To display a test pattern:
•
Open the OSD by pressing
MENU
. Highlight
Test Patterns
from the
Alignment
menu, then select a test pattern using the
LEFT
and
RIGHT
arrow buttons.
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide .