Digital Projection
M-Vision Cine 320 3D Series
COMMAND GUIDE
Remote Communications Guide
48
Rev E July 2014
Command Guide
<operation>
<command>
<values>
Notes
Main menu
aspect
= ?
0 = 16:9
1 = TheaterScope
2 = 4:3
3 = 4:3 Narrow
4 = Native
recall.mem
= ?
0 = Preset A
1 = Preset B
2 = Preset C
3 = Preset D
4 = Default
save.mem
=
0 = Preset A
1 = Preset B
2 = Preset C
3 = Preset D
overscan
= ?
0 = Off
1 = Crop
2 = Zoom
s3d.mode
= ?
0 = 2D mode (3D mode off)
1 = 3D mode - SBS Dual (side by side)
If the projector is in one 3D mode and you
intend to switch to the other 3D mode, you
MUST first switch back to 2D and then switch
to the other 3D mode.
If you try switching straight from one 3D mode
to the other, the projector will not execute the
command.
s3d.chswap
= ?
0 = Normal
1 = Swap
If the 3D images are displayed in the wrong
order, set this to Swap.
input
= ?
0 = HDMI 1
1 = HDMI 2
2 = RGB (D-sub)
3 = YPrPb 1 (RCA)
4 = YPrPb 2 (BNC)
resync
(none)
(none)
continued on next page...
Notes