Digital Projection
M-Vision Cine 320 3D Series
POSITIONING THE SCREEN AND PROJECTOR
Installation and Quick-Start Guide
7
Rev E July 2014
Positioning The Screen And Projector
Consider the following:
•
When installing the screen, ensure that it is in the best position for viewing by your audience.
•
When positioning the projector, ensure that it is at a suitable distance from the screen for the image to fill the screen.
•
Whether you are mounting the projector on the ceiling or standing it on its adjustable feet, ensure that it is level and perpendicular to the
screen.
The dimension drawing below shows the positions of the feet for table mounting, and the fixing holes for ceiling mounting.
Notes
All dimensions on the diagram on
this page are in mm.
Ensure that there is at least
30cm (12in) of space between the
ventilation outlets and any wall,
and 10cm (4in) on all other sides.
Do not stack more than 3
projectors.
Do not tilt the projector more than
±12° from side to side when in
use, as this may cause serious
lamp failure, damage the lamp
module and cause extra cost on
replacement.
The projector may be tilted to one
side and positioned in portrait mode
as long as the exhaust outlet points
upward.
When positioning the projector in
portrait mode, ensure adequate
airflow to the air inlet.
