Digital Projection
M-Vision Cine 320 3D Series
A TOUR OF THE MENUS
Operating Guide
40
Rev E July 2014
Control menu
•
Triggers
Choose from
Screen
,
16:9
,
TheaterScope
,
4:3
,
4:3 Narrow
or
RS232
to determine what will cause each trigger output to activate.
•
Auto-Source
If this setting is
On
, the projector will automatically search for an input
source in case its current input is disconnected.
•
Infrared Remote
Switch the remote control on and off.
Service menu
Factory Reset
To restore the factory default settings:
1. Navigate to
Factory Reset
and press
ENTER
/
SELECT
.
2. When prompted, use the
LEFT
and
RIGHT
arrow buttons to
highlight the
Yes
button and then press
ENTER
/
SELECT
to confirm your
choice.
Test patterns
Highlight this setting and then use the
LEFT
and
RIGHT
arrow buttons
to switch between the various patterns.
Notes
If you turn the remote control off,
you can only turn it back on again
from the control panel.
Test patterns are not available in 3D
mode.
Model Name
SERVICE >>
Factory Reset
<Execute>
Serial Number
Software Version
Active Source
Signal Format
Pixel Clock
M-Vision 320 3D
C932XXXXX00238
MD07-GE07-00011-010203
HDMI 2
1080p/60Hz TAB
148.50 MHz
Lamp Hours
18 HRS
Test Pattern
Off
Refresh Rate
H: 67.25 KHz V: 60 Hz
Reset Everything
Yes
No
Trigger 2
CONTROL >>
Trigger 1
Screen
16:9
Auto-Source
Off
Infrared Remote
On
