Digital Projection
M-Vision Cine 320 3D Series
USING THE MENUS
Operating Guide
29
Rev E July 2014
Editing projector settings
If the highlighted menu item is a setting with a list of values to choose from,
you can change the value in two different ways.
Choosing a value from a list
To access the list of values and then make a selection:
1. Highlight the menu item and press
ENTER
/
SELECT
.
2. On the new page that opens, use the
UP
and
DOWN
arrow buttons
to highlight a value, then press
ENTER
/
SELECT
again. A green “check”
symbol
marks the current selection.
3. Press
MENU
to exit the list.
Changing the value without viewing the list
To switch to the next or previous value without viewing the list,
•
press the
LEFT
or
RIGHT
arrow button.
Using a slider to set a value
Some parameters with a numeric value open a slider. To set such a
parameter:
1. Press the
LEFT
or
RIGHT
arrow button, or
ENTER
/
SELECT
. The
arrow buttons will open the slider and adjust the value at the same time.
ENTER
/
SELECT
will open the slider without altering the initial value.
2. Use the
LEFT
and
RIGHT
arrow buttons to move the slider.
3. When ready, press
MENU
to exit the slider.
List of values
Parameter
101
Slider
Item
Item
MENU >>
Selected Item
<Value>
Item
Unavailable Item
<Current Value>
<Value>
<Value>
<Highlighted Value>
Unavailable Item
Item
Item
Notes
Some menu items may be
unavailable due to settings in other
menus. Unavailable menu items
appear gray.