Digital Projection M-Vision 930 3D Series, Инструкция по установке и быстрому запуску

Страница: 57 / 140

page 49
Digital Projection M-Vision 930 Series
Operating Guide
USING THE PROJECTOR
Rev C February 2015
Geometry menu continued from previous page
Keystone settings
1
Projector to the left
The projector is positioned
to the left of the screen.
To correct, apply a positive
Horizontal Keystone
value using the
RIGHT
arrow button.
2
Projector to the right
The projector is positioned
to the right of the screen.
To correct, apply a negative
Horizontal Keystone
value using the
LEFT
arrow
button.
3
Projector high
The projector is positioned
above the screen at a
downward angle.
To correct, apply a negative
Vertical Keystone value
using the
DOWN
arrow
button.
4
Projector low
The projector is positioned
below the screen at an
upward angle.
To correct, apply a positive
Vertical Keystone
value
using the UP arrow button.
5
Projector straight
The projector is directly
opposite the screen at a
right angle both horizontally
and vertically.
No correction is needed.
Horizontal and vertical keystone corrections
1
4
2
5 3
Notes
Keystone corrections are
unavailable when using any of the
following:
•
Rotation
•
Pincushion / Barrel
•
Corners
•
Blanking
•
Edge Blend
For more information, see Possible
Geometry and Edge Blend
combinations further in this guide.