Digital Projection M-Vision 930 3D Series, Инструкция по установке и быстрому запуску

Страница: 45 / 140

page 37
Digital Projection M-Vision 930 Series
Operating Guide
USING THE MENUS
Rev C February 2015
Editing projector settings
If the highlighted menu item is a setting with a list of values to choose from, you
can change the value in two different ways.
Choosing a value from a list
To access the list of values and then make a selection:
1. Highlight the menu item and press
ENTER/SELECT
.
2. On the new page that opens, use the
UP
and
DOWN
arrow buttons to
highlight a value, then press
ENTER/SELECT
again.
A green “check” symbol marks the current selection.
3. Press MENU to exit the list.
Changing the value without viewing the list
Some menu items allow you to switch to the next or previous value without
viewing the list:
•
Press the
LEFT
or
RIGHT
arrow button.
Using a slider to set a value
Some parameters with a numeric value open a slider. To set such a parameter:
1. Press the
LEFT
or
RIGHT
arrow button, or
ENTER/SELECT
. The arrow
buttons will open the slider and adjust the value at the same time.
ENTER/SELECT
will open the slider without altering the initial value.
2. Use the LEFT and RIGHT arrow buttons to move the slider.
3. When ready, press MENU to exit the slider.
Notes
Some menu items may be
unavailable due to settings in other
menus. Unavailable menu items
appear gray.
List of values
Parameter 101
Slider
MENU>>
Select Item Adjust [Menu] Return
Item
Unavailable Item
Item
Item
Item
Highlighted Item
Current Value
Value
Value
Highlighted Value
Value
Value