Digital Projection M-Vision 930 3D Series, Инструкция по установке и быстрому запуску

Страница: 27 / 140

page 19
Digital Projection M-Vision 930 Series
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Rev C February 2015
Selecting an input signal or test pattern
Input signal
•
Connect an image source to the projector. The signal should be automatically detected by the projector, and should be displayed within
two or three seconds.
•
If more than one signal is connected, then select the input you want to display:
•
Press one of the input buttons on the remote control, or
•
Open the On-screen display (OSD) by pressing
MENU
. Highlight
Input
from the main menu, press
ENTER/SELECT
and then select
an input signal using the
UP
and
DOWN
arrow buttons. Press
ENTER/SELECT
to confirm your choice.
Test pattern
To display a test pattern:
•
Open the OSD by pressing
MENU
. Highlight
Test Patterns
from the main menu, then select a test pattern using the
LEFT
and
RIGHT
arrow buttons.
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide .