Digital Projection M-Vision 930 3D Series, Инструкция по установке и быстрому запуску

Страница: 34 / 140

page 26
Digital Projection M-Vision 930 Series
Connection Guide
SIGNAL INPUTS
Rev C February 2015
Analog inputs
1
Component 1
2
Component 2
The Component inputs use colorspaces assigned
from the
Color Space
setting in the
Color
menu.
Set Color Space to Auto and the projector will
automatically detect and assign the colorspace as
required. Otherwise, assign the colorspace as follows:
•
When using RGsB , set
Color Space
to
RGB PC
or
RGB Video .
•
When using
YPbPr
, set Color Space to YPbPr .
•
When using YCbCr , set
Color Space
to
YCbCr
.
3
VGA
This input receives analog signals from a computer.
When using this input, it is best to use a fully wired VGA
cable to connect the source to the projector. This will
allow the source to determine the projector’s capabilities
via DDC and show an optimized image. Such cables
can be identified as they have a blue connector shell.
Analog connections
1
Component 1
2
Component 2
3
VGA
3
1 2
Notes
For a complete listing of all
supported signal input modes, see
Appendix C: Supported Signal
Input Modes in the Reference
Guide .
For a complete listing of pin
configurations for all signal and
control connectors, see Appendix
E: Wiring Details in the Reference
Guide .