Digital Projection M-Vision 930 3D Series, Инструкция по установке и быстрому запуску

Страница: 50 / 140

page 42
Digital Projection M-Vision 930 Series
Operating Guide
USING THE PROJECTOR
Rev C February 2015
Image menu continued from previous page
Position and Phase
Press
ENTER/SELECT
to open the submenu.
•
V Position
and
H Position
Set the sliders as required.
•
Phase
Adjusts the phase of the pixel sampling clock relative to the incoming
signal. Adjust the phase if noise is visible.
•
Tracking
Adjusts the frequency of the pixel sampling clock. Flicker or vertical
banding indicate poor tracking.
•
Sync Level
Adjusts the voltage level of the signal detection circuitry. Adjust if the
projector loses sync during scenes where the signal drops below black.
Highlight the setting you wish to edit, and then press
ENTER/SELECT
, or the
LEFT
or
RIGHT
arrow button to open the slider.
Use the
LEFT
and
RIGHT
arrow buttons to adjust the slider.
Press
MENU
to close the slider.
Resync
Press ENTER/SELECT to force the projector to resynchronize with the current
input.
Notes
Image >> Position and Phase
Select Item [Menu] Return
H Position
Phase
Tracking
Sync Level
V Position
100
100
– – – –
– – – –
– – – –
Adjust
Image >>
Select Item [Menu] Return
Contrast
Gamma
Adaptive Contrast
Saturation
Hue
Brightness
100
100
Sharpness
Noise Reduction
Position and Phase
Resync
2.2
Off
100
0
0
100
< Execute >
Adjust