Digital Link DL3800 DS1, Руководство пользователя

Страница: 79 / 142

Terminal Interface 4-39
4
Manual Network Restoration
The DL3800Õs T1 ports are normally set to auto restore. However, you may
choose to individually restore T1 networks after they fail, through the
MANUAL NETWORK RESTORATION MENU.
1. If the port has previously been set to ÒUse w/manual restore,Ó in
the Network ConÞguration screen.
2. If the T1 is not in alarm. If the T1 is in alarm, you must Þrst clear
the alarm statistics in the STATISTICS MENU. To learn how to
clear alarm statistics, see
ÒStatisticsÓ on page 4-8 .
To access the MANUAL NETWORK RESTORATION MENU ( Figure 4-19 ),
move the highlight bar to
MANUAL NETWORK RESTORATION
in the
CONFIGURATION MENU, and press
Enter
.
Figure 4-19 MANUAL NETWORK RESTORATION MENU
To manually restore a T1 port (network), use the up and down arrow keys
to highlight the line item of the corresponding network port number.
Toggle from
No Change
to
Restore
using the Space Bar. Select
Confirm
, and
press the
Enter
key to save the changes.
NOTE: Manual restore will only work under the following conditions: