Picture Porter 35
User’s Guide
Page 84
Revision 1.2.2-2
If you are still not able to use the ‘Safely Remove Hardware’
process, here is an alternate method to disconnect Picture Porter
35 from your computer:
1. Make sure that there is no data being written to or from Picture
Porter 35.
2. Manually turn off Picture Porter 35 by pressing and holding the
Power Button for 3 seconds. This will safely shut down the
Picture Porter 35 hard drive.
3. After the Green LED on Picture Porter 35 goes off, disconnect
the USB cable between Picture Porter 35 and your computer.
Disabling devices in Mac OS:
1. Locate the icons for Picture Porter 35 hard drive and inserted
memory cards on the Desktop of your Mac.
2. Click and drag the icon to Trash.
3. After the icon disappears from the desktop, it is safe to
disconnect the USB cable between Picture Porter 35 and your
Mac.
Warning:
Unplugging Picture Porter 35 before properly disabling
it increases the risk of disrupting data transmission between
Picture Porter 35 and your computer. This might crash your
computer and Picture Porter 35 and cause data loss.
