Picture Porter 35
User’s Guide
Page 9
Revision 1.2.2-2
2.3.6. On-screen Battery Indicator
The battery status is shown at the lower-right corner of the screen.
Flashing battery: Charging
Solid full battery: Full charge
Solid partial battery: Remaining charge
Red almost empty battery: Low battery
Empty battery: Power will run out soon
Picture Porter 35 will soon force a shut
down*. Quickly finish any uncompleted
tasks and safely turn off the device or
connect to AC power immediately.
* In the event that you are in the middle of a copy task when the
Picture Porter 35 shuts down, the Picture Porter 35 will safely
stop your copy in the middle of the task before shutting down.
Note that in this case the copy task will be incomplete and
contain only part of the entire set of files that were supposed to
be copied. To avoid accidental data loss, remember to do the
copy task again after you have sufficient power.
Under
Setup
> TECHNICAL INFORMATION > Battery, the
remaining battery life will be indicated as a percentage.
2.3.7. Battery Saving Features
There are two power saving features to help maximize battery life.
1.
Screen Saver Timer
: If no button has been pressed and
there is no activity for 30 seconds (default setting), Picture
Porter 35 will turn off the LCD screen. Pressing any button
will turn the screen back on.
2.
Auto Shutdown Timer
: If no button has been pressed and
there is no activity for 10 minutes (default setting), Picture
Porter 35 will automatically shut down. Picture Porter 35 will
resume operation with the most recently accessed
navigation screen when turned on again.
You can adjust the above power saving features to best match
your needs by accessing
Setup
. Refer to
Section 3 Setting up
Picture Porter 35
for detailed instructions.
