WARNINGS
7
Wiring
Installing the AC Power Cord Clamp
Attaching the AC Power Cord
1) Open the AC Power Cord Clamp and insert the AC Power Cord as shown in
fig. 1. Then, close the Cord Clamp until it clicks into place and locks around
the AC Power Cord Collar.
The Cord Clamp has four teeth for locking. These are to adjust the
amount of grip used to hold the AC Power Cord Collar.
L
N
FG
AC Connector
*1
*1
L : AC Input Terminal-live line
N : AC Input Terminal-neutral line
FG : Ground Terminal connected to the FP chassis
Figure 1
AC Plug Collar
AC Plug
Cord Clamp
6
OSD settings
You can operate the FP screen menus via the touch panel, and adjust screen
image display to a minute level. The feature is called OSD (On Screen Dis-
play). For details,
FP3700-T41 User Manual 3.3.3 Calibration of OSD Display Position
• Tightening the screws with too much force can damage the FP unit's
case.
• The necessary torque is 0.5N•m.
•
To avoid an electric shock, when connecting the FP's power cord terminals to
the power terminal block, confirm that the FP's power supply is completely turned
OFF, via a breaker, or similar unit.
•
To avoid the dangers of fire, electric hazards and equipment damege, be sure to
use only the specified voltage when operating the FP.
•
Since there is no power switch on the FP unit, be sure to attach a breaker-type
switch to its power cord.
The Power Cord included in the FP unit's package is designed only for
AC100V or AC115V use. Any other voltage will require a different cord.
