4
Interfaces
Analog RGB Interface
8
7
6
5
4
3
2
1
ON
SW1
SW1-8 Reserved (Set this switch to OFF)
SW1-7 Reserved (Set this switch to OFF)
SW1-6 Reserved (Set this switch to OFF)
SW1-5 Switch between analog RGB and DVI-D input
SW1-4 Reserved (Set this switch to OFF)
SW1-3 Reserved (Set this switch to OFF)
SW1-2 Display/hide the OSD
SW1-1 Switch between USB and RS232C for touch panel data
transmission.
• SW1-1
Dip Switch SW1-1 is used to set the touch panel data input (command
control) method to either USB or RS-232C.
When the switch is set to OFF, data output and command input/output are
performed via RS-232C. When the switch is set to ON, USB is used.
The default setting is OFF. (RS-232C)
• SW1-2
Dip Switch SW1-2 is used to display or hide the OSD.
To hide the OSD, set the switch to ON. To display the OSD, set the switch
to OFF.
The default setting is OFF. (OSD is displayed.)
• SW1-5
Dip Switch SW1-5 is used to change the image input method.
When the switch is set to ON, DVI-D image input method is used. When the
switch is set to OFF, the analog RGB image input method is used.
The default setting is OFF. (Analog RGB is used.)
Input signal type
Analog RGB
Input signal characteristic Image signal: analog RGB
Synchronous signal: T T L level, negative true or positive true
Scanning type: non-interlace
Setting by OSD
(On Screen Display)
CONT RAST
BLACK LEVEL
H-POS
V-POS
OSD H-POSIT ION
PHASE
BACKLIGHT
DEFAULT (ALL CLEAR)
