1
Part Names
The following items are included in the FP unit's package. Before
using the FP, please confirm that all items listed here are present.
This unit has been carefully packed, with special attention to qual-
ity. However, should you find anything damaged or missing, please
contact your local FP distributor immediately.
Package Contents
FP unit
(FP3700-T41)
A: TFT Color LCD
Acts as a display monitor for your host.
B: Touch Panel
Allows you to switch screens or write data to the
host.
C: AC Connector
Provides the input and ground terminals for a
power cable.
D: Setting Switch (Dip switches)
Used to change the settings of each operation
mode.
E: VGA Interface (analog RGB) Connector
Connector for analog RGB interface
F: DVI-D Interface Connector
Connector for DVI-D interface
G: RS-232C Connector
Connector for RS-232C (serial) interface. Used for
sending touch panel data to the host, and for receiv-
ing commands from the host.
H: USB Connector
Connector for USB interface. Used for both send-
ing touch panel data to the host, and receiving
commands from the host.
I: Front LED
Used to indicate the condition of the power supply,
a backlight burnout or image signal input.
Front View
Options
Cables
Touch panel driver software
Maintenance Parts
CD-ROM
(1)
Contains the FP3700-T41 User Manual
Installation Gasket
(1)
Installation Brackets
(4/set, 2sets)
FP3700-T41 Installation Guide
(1)
(this manual)
AC Power Cord
(1)
Cord Clamp
(1)
USB Cable Strap
(1)
Rear View
A, B
I
Bottom View
C
D E F G
H
The Power Cord included in the FP unit's package is designed only for
AC100V or AC115V use. Any other voltage will require a different cord.
