Digital Equipment Prioris HX590 DP, Руководство по техническому обслуживанию

Страница: 61 / 83

Digital PRIORIS HX590 & HX590 DP Server Troubleshooting
MCS Logistics Engineering - Nijmegen 61
P
R
I
O
R
I
S
H
X
Server Troubleshooting
Problem Possible Cause Action
No response
when the server
is on Main logic board failed.
Main logic board jumpers
incorrectly set.
CPU module has failed.
CPU module jumpers incorrectly
set.
No memory module or SIMMs
installed.
Side panels removed.
Replace the failed component.
Set all appropriate jumpers.
Replace the failed component.
Make sure the jumpers are correctly set.
Install SIMMs and memory module.
Install side panels.
Power is on-but
there is no
screen display Brightness and contrast controls
are not correctly set.
Monitor cable is incorrectly
installed.
Video controller has failed.
Incorrect VGA drivers installed.
Adjust the brightness and contrast controls.
Check all monitor connections.
Replace the failed component.
Install the correct VGA drivers.
Power is on-but
there is no
screen display
OCP not backlit. Press any keyboard key or manual LCD switch.
Make sure OCP backlight is set to ON in the BIOS
Setup utility.
Server operates
incorrectly after
installing
optional
expansion board
Expansion board installed
incorrectly.
Did not run SCU to configure
expansion board after installation.
Did not install CFG file for
expansion board.
Expansion board has failed.
Remove expansion board and reinstall.
Run the SCU to properly configure expansion board.
Run the SCU and add CFG file
(if necessary).
Remove expansion board and reboot.
If server boots without errors-replace expansion
board.