MicroVu HD™ Operation Guide 860-00222-00 Rev A
Digital Ally, Inc. | Device Configuration – VuVault 2-9
Enter the location(s) latitude in an integer decimal format (i.e.; 38.89171). To
disable a location, the latitude, longitude, and radius parameters must all be
zero.
Longitude
Enter the location(s) longitude in an integer decimal format (i.e.; -94.670956).
To disable a location, the latitude, longitude, and radius parameters must all
be zero.
Radius (miles)
Enter the radius of the unauthorized location in miles. To disable an
unauthorized location, the latitude, longitude, and radius parameters must all
be zero.
Once the desired settings have been entered, click
and proceed below to activate your device.
Activating your MicroVu HD within VuVault
The
Media Card Administration
function is used to erase, format, and activate the
microSD Card to be ready for use with VuVault
and the MicroVu HD. During activation,
the file “deviceconfig” will be written to the SD Card. This file contains all of the VuVault
configuration data for the MicroVu HD.
The MicroVu HD can alternatively be activated by connecting to a VuVault computer via
the USB port in the access panel of the unit.
If activating via USB cable, make sure the MicroVu HD is powered on and in Standby
mode. If you are using the SD Card method, power OFF your MicroVu HD before removing
the card from the unit.
1.
Select
Media Card Admin
from the Admin navigation bar.
2.
Select the correct
Device Type
from the available options. You must select
“MicroVu HD Video Recorder”.
3.
Click the button to detect the microSD Card connected to a card reader,
or the MicroVu HD via USB from the available removable drives.
