DG-BR1000Nu User Manual
97
Here is the description of every setup item:
Parameter
Description
Enable WPS
Check this box to enable WPS function, uncheck it to disable
WPS.
Enable WPS proxy Check this box to enable or disable WPS proxy function. By
default check box ix disabled.
In this mode, AP function as a proxy between the Registrar and
an Enrollee.
WPS Information
WPS related system information will be displayed here:
WPS Status: If the wireless security (encryption) function of
this wireless router is properly set, you’ll see ‘Configured’
message here. If wireless security function has not been set,
you’ll see ‘unConfigured’.
PinCode Self: This is the WPS PIN code of this wireless router.
This code is useful when you need to build wireless connection
by WPS with other WPS-enabled wireless devices.
SSID: The SSID of this wireless router will be displayed here.
Authentication Mode: The wireless security authentication
mode of this wireless router will be displayed here. If you don’t
enable security function of the wireless router before WPS is
activated, the router will auto set the security to WPA (AES)
and generate a set of passphrase key for WPS connection.
Passphrase Key: The wireless security key of the router will be
displayed here.
Device Configure
Config Mode: There are ‘Registrar’ and ‘Enrollee’ modes for
the WPS connection. When ‘Registrar’ is enabled, the wireless
clients will follow the router’s wireless settings for WPS
connection. When ‘Enrollee’ mode is enabled, the router will
follow the wireless settings of wireless client for WPS
connection.
