DG-BR1000Nu User Manual
82
2-8-1-6 Setup procedure for Universal Repeater
In this mode, the router can act as a wireless repeater; it can be Station and AP at the
same time. It can use Station function to connect to a Root AP and use AP function to
service all wireless stations within its coverage.
Here is the description of every setup item:
Parameter
Description
Band
Select the band you want to use; all the wireless routers must use
the same setting.
SSID
This is the name of wireless router. You can type any
alphanumerical characters here, maximum 32 characters. SSID is
used to identify your own wireless router from others when there
are other wireless routers in the same area. Default SSID is
‘DIGISOL’, it’s recommended to change default SSID value to the
one which is meaningful to you, like myhome, office_room1, etc.
Channel Number
Select the channel you want to use; all the wireless clients must
use the same setting.
Associated Clients Click ‘Show Active Clients’ button, then an “Active Wireless
NOTE: For Repeater Mode, this router will demodulate the received
signal, and check if the signal is noise or valid data for the operating
network. Once the Access Point validates the signal, then it will
modulate and amplify the signal again. The output power of this mode is
the same as that of WDS and normal AP mode.
