DG-BR1000Nu User Manual
127
Here is the description of every setup item:
Parameter
Description
Enable DMZ
Check this box to enable DMZ function, uncheck this box to
disable DMZ function.
Public IP address
You can select ‘Dynamic IP’ or ‘Static IP’ here connection
session from dropdown menu; if you select ‘Dynamic IP’
then select the session from the drop down box; if you select
‘Static IP’, please input the IP address that you want to map
to a specific private IP address.
Client PC IP address
Please input the private IP address that Internet IP address
will be mapped to.
Computer Name
Pull down the menu and all the computers connected to the
router will be listed here. You can easily select the computer
name without checking the IP address of the computer
Add
Click ‘Add’ button to add the public IP address and
associated private IP address to the DMZ table.
Reset
Click ‘Reset’ to remove the value you inputted in Public IP
address and Client PC IP address field.
Current DMZ Table
All existing public IP address and private IP address mapping
will be displayed here.
Delete
If you want to delete a specific DMZ entry, check the ‘select’
box of the DMZ entry you want to delete, then click ‘Delete’
button. (You can select more than one DMZ entries).
Delete All
If you want to delete all DMZ entries listed here, please click
‘Delete All’ button.
Reset
You can also click ‘Reset’ button to unselect all DMZ entries.
After you finish with all settings, please click ‘Apply’ button and the following
message will be displayed on your web browser:
If you want to reset all settings in this page back to previously-saved value, please
click ‘Cancel’ button.
Please click ‘Continue’ to go back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so that the settings will take effect
(Please wait for about 30 seconds while the router is rebooting).
