DG-BR1000Nu User Manual
85
happen after modification.
N Data Rate
Same as above, but only for 802.11n clients.
Channel Width
Set channel width of wireless radio. Do not modify default
value if you don’t know what it is, default setting is ‘Auto
20/40 MHz’.
Preamble Type
Set the type of preamble, do not modify default value if you
don’t know what it is, default setting is ‘Short Preamble’.
Broadcast ESSID
Decide if the wireless router will broadcast its own ESSID or
not. You can hide the ESSID of your wireless router (set the
option to ‘Disable’), so only people those who know the
ESSID of your wireless router can get connected.
CTS Protect
Enabling this setting will reduce the chance of radio signal
collisions between 802.11b and 802.11g/n wireless access
points. It’s recommended to set this option to ‘Auto’ or
‘Always’. However, if you set to ‘None’, your wireless router
should be able to work fine, too.
Tx Power
Select the amount of wireless transmit power to control the
wireless range.
WMM
It is short for Wi-Fi Multimedia, it will enhance the data
transfer performance of multimedia contents when they’re
being transferred over wireless network. If you don’t know
what it is / not sure if you need it, it’s safe to set this option to
‘Enable’, however, default value is ‘Disable’.
After you finish these wireless settings, please click ‘Apply’ button and the following
message will be displayed on your web browser:
Please click ‘Continue’ to go back to previous setup menu; to continue on router
setup, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait
for about 30 seconds while router is rebooting).
