DG-BR1000Nu User Manual
83
Client Table” will pop up. You can see the status of all active
wireless stations that are connecting to the access point.
Root AP SSID
In ‘Universal Repeater’ mode, this device can act as a station to
connect to a Root AP. You should assign the SSID of the Root AP
here or click ‘Site Survey’ button to choose a Root AP.
Site Survey
Click ‘Site Survey’ button, then a “Wireless Site Survey Table”
will pop up. It will list all available access points near by. You can
select one access point in the table and the router will join wireless
LAN through this access point.
After you finish the Wireless Basic Setting, please click ‘Apply’ button, after you
click ‘Apply’, the following message will be displayed on your web browser:
Please click ‘Continue’ to go back to previous setup menu; to continue on router
setup, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait
for about 30 seconds while router is rebooting).
