1080P Powerline AV Sender System User Manual
DGHDP3 Version
1.0
21
Appendix 3
PLC Pairing
The
paired
PLCs form a logical network when connected to common power-line media.
This is pre-paired during manufacturing. It’s not necessary to re-pair the PLCs normally.
Note:
As the above application example, RX is well-paired with TX already
when manufacturing. If you would like to take the advantage of Ethernet over
PLC bridge function built in the TX and RX, you will need:
1. Prepare a HomePlug AV compatible PLC adaptor device
2. Reset the PLC adaptor to be a joiner (please refer to its user manual or
contact its support center)
3. Do PLC pairing between the PLC adaptor and either one of TX and RX
