1080P Powerline AV Sender System User Manual
DGHDP3 Version
1.0
13
Fig Area Name
Description
50 Hz (PAL).
2.
When the OSD menu is displaying,
this button is used to enable/disable
the display of PLC throughput warning
message
Setting
Information (for RX)
Displays OSD information
Setting
Scroll up (for RX)
Scroll up button on the OSD Menu
Setting
Scroll down (for RX)
Scroll-down button on the OSD Menu
Setting
Move left (for RX)
Move-to-left button on the OSD Menu
Setting
Move right (for RX)
Move-to-right button on the OSD Menu
Setting Setting
confirmation This button is like the “Enter” key, used to
confirm a setting selection.
Setting
Menu (for RX)
Bring up OSD Menu on the display that is
attached to the RX.
Setting
OSD Exit (for RX)
Exit OSD Menu
Volume
Audio Mute(for RX)
Audio Mute on/off on the receiver
Volume
+
Setting
Force Bandwidth to LOW
(for TX)
In case of bandwidth of TX is set too high
to transmit the video to RX. Press
[Factory] key then [Volume Down] can
force the Network Bandwidth to LOW to let
TX/RX link together in the poor network
environment.
+
+
Setting
Force all TX/RX to be
wake up from standby
mode
Quickly press the [RIGHT] key to force all
TX/RX to wake up if devices are in linked
state
+
+
Setting
Force all TX/RX to enter
into standby mode
Quickly press the [LEFT] key to force all
TX/RX to enter into the standby mode if
devices are in linked state
P.S. TX source should be turned off first if
auto-wakeup function is enabled.
