1080P Powerline AV Sender System User Manual
DGHDP3 Version
1.0
9
Step 2: Pairing procedures for troubleshooting
“Pairing” refers to the process where two
independent systems (i.e. RX and TX)
identify themselves and establish/re-
establish the link over the powerline or
Ethernet network. You can use these
procedures when troubleshooting your
system (i.e. Video fails to appear on TV
connected to the RX).
The flowchart to the right will instruct you on
how to proceed in order. The “Video
displaying?” diamond refers to video can be
displayed on the TV attached to the RX. The
procedures in the boxes are explained in the
Appendices as listed below:
Appendix 1:
RX/TX Pairing
Appendix 2:
Reset RX/TX to System
Defaults
It is assumed that RX, TX and video
equipment are all properly connected and
powered on.
Note
: It is highly recommended that you
perform these procedures with the RX and
TX in the same vicinity, preferably attached
to the same power outlet.
