DigiSender HDPRO3 DGHDP3, Инструкция по эксплуатации

Страница: 15 / 28

1080P Powerline AV Sender System User Manual
DGHDP3 Version 1.0
14
6 OSD Menu
When the system is active, you can press
the “Menu” button on the remote
controller to bring up the OSD menu on
the display attached to the RX. The OSD
menu is used to configure various
options as described below.
OSD Menu SETUP Items:
 Language
 Network Bandwidth
 LIP SYNC
 Remote control type
 HDMI CEC
 Select TX Station

Reset to default settings
 Information
Navigating the OSD Menu
You can navigate the OSD Menu using the following keys on the Remote
Controller.
 Press the “Exit” button to exit the OSD Menu

Press [ → ] or “OK” buttons to select an item
on the menu and move on to the next menu
item.

Press [

] or [ ↓ ] buttons to select the optional
items.

Note:
[Reset to default settings] will not reset TX station name and the pairing
table. Please refer the Appendix 2 if you want to reset the pairing table.
Reset to default settings ?
Press
"OK" to reset.
Or,
Press any key to exit.
SETUP
Network Bandwidth
HDMI CEC
Language
Information
LIP SYNC
Reset to default settings
Select TX Station
Remote control type