1080P Powerline AV Sender System User Manual
DGHDP3 Version
1.0
8
3. Troubleshooting
If no video displays on the remote TV attached to your RX, proceed with the steps
below:
Step 1: Check connections, power and equipment
Make sure all power connections are secure and power is supplied to all
equipment.
Inspect all cables and cable connections between Player-TX and TV-RX.
Make sure the Video Player is working properly and is transmitting video (hook
up a TV directly to the player to confirm). Also, make sure the TV that is
attached to the TX is in working order.
Make sure that the Source LED indicator matches the physical connection
between the TX and player that is connected to it. The LED indicators are
described in the table below.
1
HDMI connector 1
2
HDMI connector 2
3
HDMI connector 3
e.g. If you attached a Blu-Ray player to
your Transmitter using HDMI2, but your
Source LED indicator “1” is illuminated (HDMI port1), the transmitter is looking
on the wrong input connector. Simply press the Source button (see above) on
the TX until the appropriate Source LED indicator illuminates.
If video still does not display, go to Step 2.
