DiGiQuest SA121V-120100V, Руководство пользователя

Страница: 68 / 74

DIGIQUEST
28
Press the
OK key on Connect, the screen will appear the dialog box
of INFORMATION: to enable standby mode select YES; a window
will appear to enter the previously created association code: use the
numeric buttons on the remote control.
Once connected, the Voice Control Set window will appear showing
the successful connection.
To complete the association, click on the DiscVision IoT website,
under "Full account connection". The device indicated on the site is
by default Receiver: you can choose the desired name from the
drop-down menu.
Wait for the speaker to find the digiquest receiver connected.
The receiver is ready to receive voice commands.
The following are some voice instructions:
“Alexa, next channel on device (receiver)”, the STB will be
operated to turn to next channel immediately.
Here the commands to control your Receiver:
- Alexa, watch channel 200 (on [receiver])
- Alexa, watch BBC (on [receiver])
- Alexa, next channel (on [receiver])
- Alexa, previous channel (on [receiver])
- Alexa, turn off ([receiver])
- Alexa, turn on ([receiver])
- Alexa, set the volume ([receiver]) to 30
- Alexa, turn down the volume by 20 ([receiver])
- Alexa, turn up the volume by 20 (on [receiver])
- Alexa, mute [receiver]
- Alexa, unmute [receiver]