DiGiQuest SA121V-120100V, Руководство пользователя

Страница: 52 / 74

DIGIQUEST
12
panel of the TV (A) or above the TV (B) but with a tilt such that you
can receive the signal from the remote control.
It is equipped with a power led: red when it is off, green when it is
on.
Note: the sensor is transparent and can receive the signal from
multiple angles.
CAUTION: do not disconnect or connect the remote control sensor
plug when the receiver is turned on; the receiver will turn off, it will
be turned on again, and this may cause serious damage to the unit.
Antenna connection
Connect the antenna to the RF IN input of the decoder.
Connecting the Power Supply
Only connect the supplied power supply to the DC IN port after all
connections have been completed.
Switching on the decoder
Turn on the TV.
Connect the plug of the decoder to the power outlet.
Press the
Power button on the remote control . If no picture
appears on the screen, select the correct AV mode using the
TV remote control.