DiGiQuest SA121V-120100V, Руководство пользователя

Страница: 61 / 74

ENGLISH
21
channel number, frequency and band. Move to Search and press OK .
Channel update
In this menu you can set the automatic update of the channel list.
You can check if an update of the list is available by clicking on the
Channel upgrade window and pressing OK . Confirm and wait for
the search result.
Software Upgrade
- OTA setting
The decoder can be updated via air (OTA). In this menu you can
check if an update is available. The update will be automatically
searched at the time set in the same menu. You can check if an
update is available by clicking on the
OTA update window and
pressing OK . Confirm and wait for the search result.
- USB upgrade
You can update the decoder via USB if the update file was loaded to
a USB memory device and then connected to the decoder. Enter this
menu with the
OK key. Place on the update file and press OK to start
it.
- FTP setting
To update the box via the Internet, you need to be connected to a
network. In the FTP screen you have already entered all the data
needed to perform the update: click on the
FTP Update box and
press OK to start the procedure. Note: Do not turn off the STB
during the update process. Wait until the channel is seen again.
Note: If an update is available via FTP, a message will appear on
the screen.
Factory set
To reset the decoder and return it to factory settings. You must
enter your password (PIN), confirm by pressing
YES and press OK .
Use this function with caution, all data stored by the user will be
lost! You will need to repeat the Installation Guide.