DiGiQuest SA121V-120100V, Руководство пользователя

Страница: 57 / 74

ENGLISH
17
OK to open the list, select an option by confirming with OK and
then press

to the next item.
- Program
Select channel.
- Date
Set the date of the event to be programmed. Press the OK button
and use the number buttons. Once finished, press OK again to
confirm and go to the following item with the

key.
- Start time
Enter the start time of the event. Press the OK button and use the
number buttons. Once finished, press OK again to confirm and go
to the following item with the

key.
- Cycle
Once, Daily, Weekly.
- Dur Time
Not active.
Once the events are programmed, they will all be displayed on the
first screen of the Timer menu. You can position yourself on the
relevant line and press the corresponding colored key to edit
(
Rename BLUE key) or Delete ( YELLOW ) the programmed events.
A few seconds before the event begins, a warning message will
appear on the screen and the channel will be switched to the
programmed channel when the countdown ends.
NOTE: When setting a timer, it is recommended that you turn
off the Channel Standby Update feature and Software Update.
Parent set
To access this menu you must enter your PIN.
- STB lock
You can block the power on of the decoder by setting in this item
Lock.