IMPORTANT INFORMATION FOR USERS
Installation and Operation of Digiplan Equipment
It is important that Digiplan motion control equipment is installed and operated in such a way that all applicable
safety requirements are met. Note that it may be necessary for the completed installation to comply with the Low
Voltage Directive or Machinery Directive. It is your responsibility as a user to ensure that you identify the relevant
safety standards and comply with them; failure to do so may result in damage to equipment and personal injury. In
particular, you should study the contents of this user guide carefully before installing or operating the equipment.
The installation, set-up, test and maintenance procedures given in this User Guide should only be carried out by
competent personnel trained in the installation of electronic equipment. Such personnel should be aware of the
potential electrical and mechanical hazards associated with mains-powered motion control equipment - please see
the safety warning below. The individual or group having overall responsibility for this equipment must ensure that
operators are adequately trained.
Under no circumstances will the suppliers of the equipment be liable for any incidental, consequential or special
damages of any kind whatsoever, including but not limited to lost profits arising from or in any way connected with
the use of the equipment or this user guide.
!
SAFETY WARNING
High-performance motion control equipment is capable of producing rapid movement and very high forces.
Unexpected motion may occur especially during the development of controller programs.
KEEP WELL CLEAR of
any machinery driven by stepper or servo motors. Never touch any part of the equipment while it is in operation.
This product is sold as a motion control component to be installed in a complete system using good engineering
practice. Care must be taken to ensure that the product is installed and used in a safe manner according to local
safety laws and regulations. In particular, the product must be enclosed such that no part is accessible while power
may be applied.
If the equipment is used in any manner that does not conform to the instructions given in this User Guide, then the
protection provided by the equipment may be impaired.
The information in this user guide, including any apparatus, methods, techniques, and concepts described herein,
are the proprietary property of Parker Digiplan or its licensors, and may not be copied, disclosed, or used for any
purpose not expressly authorised by the owner thereof.
Since Digiplan constantly strives to improve all of its products, we reserve the right to modify equipment and user
guides without prior notice. No part of this user guide may be reproduced in any form without the prior consent of
Digiplan.
© Digiplan Division of Parker Hannifin plc, 1997
– All Rights Reserved –
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
