Digimerge DPP12D, Инструкция по эксплуатации

Страница: 7 / 22

Electronic Day/Night Professional Camera
11 10
Electronic Day/Night Professional Camera
■
Names and Functions of Parts Names and Functions of Parts
■
IRIS JACK OSD EXTRA
POWER
DC
VIDEO
SET
VIDEO OUT
AC24V IN
DC12V IN
⑪
⑤ ⑥ ⑧ ⑦
⑨
⑩
Rear
⑤
Auto iris lens connector
Connectionterminalforanautoirislens.
⑥
Auto iris lens selection switch
Used to change between DC or Video
depending upon the type of auto liris in use.
⑦
OSD Extra
Connectstotheremotecontroller(option)
when you want to control OSD away
from the camera
⑧
Video output terminal
Sends video signals and connects
to the video input terminal of the monitor.
⑨
Power lamp
Lights up when the correct power is supplied to the camera.
⑩
Setting button
●
SET button
: Used for the menu display. This button can be used toconfirm
settings after changing the value of the selected function orcurrent conditions.
●
UP & DOWN buttons
: Used for selecting items by moving thecursor up or
down on the menu screen.
●
LEFT & RIGHT buttons
: Used when changing item values, bymoving the
cursor to the left or right on the menu screen.
⑪
Power input terminal
Low voltage power connection.
Top
④
Mounting Bracket
Use the screw holes provided when fixing the
camera onto a mounting bracket. Use the clamp
screw as shown in the picture.
※ The mounting bracket can be attached to either
the bottom or the top of the camera. Be careful
not to tighten the screws more than 5mm into the
body, otherwise serious damage can occur.
L
Key Extra Connector (Optional - ACCRC01)
Connects to the remote controller(option) when you want to set up OSD remotely.
IRIS JACK OSD EXTRA
POWER
DC
VIDEO
SET
VIDEO OUT
AC 24V IN
DC 12V IN
OSD EXTRA
Remote Controller
④
※
Contact an authorized technician for inspection.