Digimerge DPP12D, Инструкция по эксплуатации, Страница: 12 / 22

SETUP
LENS DC
EXPOSURE
WHITE BAL
ㅡㅡㅡ
DAY NIGHT
3DNR B/W
ON
English
CONFIGURACION
LENTE DC
EXPOSURE
BAL BLANC
ㅡㅡㅡ
Spanish
SET UP
LENS DC
EXPOSITION
BAL BLANC
ㅡㅡㅡ
French
Note
SETUP
LENS DC
EXPOSURE
WHITE BAL
ㅡㅡㅡ
DAY NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT B/W
ON
●
DC/VIDEO : Auto Iris Lens selection.
• When using an auto iris lens, the setting of the auto iris lens selection
switch, located on the back of the camera, must be on DC or VIDEO
depending on the type of the lens which being used.
(Refer to the picture on page 13)
• The brightness of the screen can be adjusted in DC mode.
The brightness can be adjusted within the range of 0 ~100.
The optimum level of brightness can be achieved using this adjustment.
• If you press the Set button in "MANUAL LENS", You can Adjust
brightness in EXPOSURE.
• If you press the Set button in "DC/VIDEO", You can't adjust brightness
in EXPOSURE, Return to "LENS" and adjust brightness.
●
MANUAL : Manual Lens selection.
3. Set up a selected item by using the Left and Right buttons.
4. To finish and save the settings, select 'EXIT' and press the SET button.
This function is used to adjust the brightness of the screen.
1. When the SETUP menu screen is displayed on the screen, position
the cursor to point to LENS using the Up and Down buttons.
2. Select the type of lens using the Left and Right buttons.
Select the desired menu
item by using the UP and
DOWN buttons.
Modes can be changed
using the LEFT and
RIGHT buttons.
LENS
Note
• An item with the icon also has sub-menus. To select a sub-menu,
press the SET button.
• An item with the - - - icon has no sub-menus available for selection.
■
How to Use the Camera
RETURN
LENS
RET
BRIGHTNESS 40
RETOUR
LENS
RETOUR
LUMINOSITE 40
REGRESAR
LENTE
REGR
BRILLO 40
3. Press the SET button to return to the previous menu.
Electronic Day/Night Professional Camera
21 20
Electronic Day/Night Professional Camera
English Spanish French