10
GETTING STARTED
1. Connect the AC Power Cord to the Power Adapter and plug it into an electrical outlet.
Connect up to 4 cameras to the BNC Video inputs on the back of the DVR.
Turn the Main Power Switch to ON.
The Red LED indicator will illuminate and the DVR will be in the standby mode
2. The following messages appear when the power is ON successfully.
Note:
The system is only checking for a MASTER HDD. Install the Slave HDD onto the
DVR, if using a Slave HDD, and setup the HDD Slave in the SETUP MENU and restart
the DVR.
Note:
If the HDD is not properly connected a FAIL message appears. Retry connecting
the HDD and turn on the power.
*** MASTER HDD DETECT ***
POWER ON CHECK _ _ _ _ _ _ _ _ _ _ _ OK
HDD IDENTIFY CHECK _ _ _ _ _ _ _ _ _ _ _ _ _ OK
HDD R/W CHECK _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ OK
MODEL :XXXXXXXXXXXXXXXXXXXXXX
HDD LBA : XXXXXXXXXXXXXXXXXXXXXX
HDD SPACE : XXX GB
100 %
Dynamic IP Request OK
