Digimerge DGR104, Инструкция по установке и эксплуатации

Страница: 14 / 37

The remote connection on the DVR uses 8 data bits, 1 start bit, and 1 stop bit, no Parity.
Below is an example of the data stream with the control codes shown.
ACT – OxFF OxCO ID STOP – Ox7F
FUNCTION
Please refer to
Appendix 3 for information on the Pin connections and command protocols that would be used in this
application.
Timer Recording Setup
On the Main menu, selecting the Timer option will allow you to set daily schedules in which
you would like the DVR to automatically record.
(Menu)
► Timer
Record
Alarm
Remote
System
Event
Pressing
ENTER after scrolling to the Timer option will bring up the following menu options:
Timer
(Timer)
Day Start End IPS
Daily 01:00 02:00 Off
SUN 12:00 13:00 Off
MON
08:00 09:00 Off
MO~FR 00:00 01:00 Off
SA~SU 20:00 21:00 Off
JAN-01 15:00 16:00 Off
Timer Enable:
No
1. Press ▲ / ▼ to select the day(s) to record on, the available options are…
Daily : Everyday
SUN : Sunday
MON : Monday
TUE : Tuesday
WED : Wednesday
THU : Thursday
FRI : Friday
SAT : Saturday
MO-FR : Monday to Friday
SA-SU : Saturday & Sunday
JAN-01 : Special Date
OFF : Not activated
2. Use the ◄ / ► scroll keys to move to START record time 00:00 (HH:MM)
Press ▲ / ▼ to set the start time
3. Press ◄ / ► move to END record time 00:00 (HH:MM)
Press ▲ / ▼ to change END record Time numerical digit
4. Press
◄ / ► move to QUALITY
Press ▲ / ▼ to choose options of
BEST, HIGH, NORMAL, BASIC
5. Press ◄ / ► move to Record IPS (Images Per Second)
Press ▲ / ▼ to choose one of the following options
NTSC: 15A, 15, 8, 4, 2, 1
PAL: 12A, 12, 6, 3, 2, 1
6. Press MENU to confirm current operation, and enter to next Timer Record setup.
13