Digimerge D300 SERIES, Руководство по установке

Страница: 41 / 64

Revision 1.0 41
Network Set
SECTION 4
IP Set
The options in the IP Set menu control the local network setup for the Unit. See 45 for additional
network setup instructions.
• DHCP : Press the
K
and
L
buttons to highlight,
and press the
←→
buttons to set to NO/YES.
Set this option to YES to allow the unit to get
Network information from the Router; set this
option to NO if information will be manually
assigned to the DVR unit.
• IP ADDRESS : Press the
K
and
L
buttons to
highlight, and press the
SEL
button to enter
setup. Use the Numbers on the front panel of
the DVR to set the IP address.
• GATEWAY : Press the
K
and
L
buttons to
highlight, and press the
SEL
button to set to
enter setup. Use the Numbers on the front panel
of the DVR to set the Gateway address.
• NETMASK : Press the
K
and
L
buttons to highlight, and press the
SEL
button to set to enter
setup. Use the Numbers on the front panel of the DVR to set the Net Mask.
• DNS SERVER : Press the
K
and
L
buttons to highlight, and press the
SEL
button to enter
setup. Use the Numbers on the front panel of the DVR to set the DNS Server address.
• DVR PORT : Press the
K
and
L
buttons to highlight, and press the
SEL
button to enter setup.
Use the Numbers on the front panel of the DVR to set the DVR Port to 2000 .
• WEBSERVER PORT : Press the
K
and
L
buttons to highlight, and press the
SEL
button to
enter setup. Use the Numbers on the front panel of the DVR to set the Webserver Port to 0080 .
• SAVE & EXIT : Saves any changes made, and exits to the Main Menu. Press the
K
and
L
buttons to highlight, and press the SEL button to accept the changes.
DHCP:
IP Address:
Gateway:
Netmask:
DNS Server:
DVR Port:
Webserver Port:
Save & Exit NO
###.###.###.###
###.###.###.###
###.###.###.###
###.###.###.###
2000
0080