Digimerge D300 SERIES, Руководство по установке

Страница: 25 / 64

Revision 1.0 25
Display Set
SECTION 4
OSD ON/OFF
Turns the information display/camera
names, hard drive usage, date and time)
ON/OFF.
1. OSD : Turns the ON SCREEN DISPLAY to ON/OFF. To change the setting, press the
K
and
L
buttons to highlight, and press the
←→
buttons to switch between ON/OFF.
2. SAVE & EXIT : Saves any changes made, and exits to the Main Menu. Press the
K
and
L
buttons
to highlight, and press the SEL button to accept the changes.
Set Display Sequence (8/16 CH Only)
Display Settings for Single or Quad display of the cameras (in Sequence Mode).
NOTE : The number of cameras displayed on submenus will change based on the Model of DVR:
4, 8 or 16 Cameras are available.
OSD ON/OFF
OSD:
Save & Exit ON
Set Display Sequence
Page:
Camera 1:
Camera 2:
Camera 3:
Camera 4:
Camera 5:
Camera 6:
Camera 7:
Camera 8:
Save & Exit
1
10 SEC
BYPASS
BYPASS
BYPASS
BYPASS
BYPASS
BYPASS
BYPASS
Full Display Sequence
Quad Display Sequence
Start Full Display Seq.
Start Quad Display Seq
Page 1 SEQ:
Page 2 SEQ:
Save & Exit BYPASS
BYPASS