Digimerge D300 SERIES, Руководство по установке

Страница: 29 / 64

Revision 1.0 29
Recording Set
SECTION 4
Recording Set
Global Parameters
Settings for General Parameters.
1. AUDIO # REC : Turns Audio recording ON/OFF. press the
K
and
L
buttons to highlight, and
press the
←→
buttons to change to ON/OFF.
2. REPEAT RECORDING: Allows the DVR unit to repeat recording. To change the setting, press
the
K
and
L
buttons to highlight, and press the
←→
buttons to change to ON/OFF.
3. WATERMARK EMBEDDING : Adds Watermarking to the recorded event. Press the
K
and
L
buttons to highlight, and press the
←→
buttons to change to ON/OFF.
4. RECORDING RESOLUTION: Sets the Recording Resolution for events. To change the
Resolution, press the
K
and
L
buttons to highlight, and press the
←→
buttons to change to
either 720x240 or 360x240.
5. SAVE & EXIT : Saves any changes made, and exits to the Main Menu. Press the
K
and
L
buttons
to highlight, and press the SEL button to accept the changes.
Normal Recording
Controls the settings for Manual Recording.
NOTE : The number of cameras displayed on submenus will change
based on the Model of DVR: 4, 8 or 16 Cameras are available.
1. CH1 - CH4 : Lists all available cameras for configuration. Press the
K
and
L
buttons to highlight,
and press the
←→
buttons to select the FPS or Quality for each CH. Use the
K
and
L
buttons
to change the settings, and press SEL to accept the changes:
• FPS: A set number of Frames Per Second (total) is divided between all available cameras
based on Resolution settings.
• QUALITY: Set the quality level for the recording - High, Mid or Low
2. SAVE & EXIT : Saves any changes made, and exits to the Main Menu. Press the
K
and
L
buttons
to highlight, and press the SEL button to accept the changes.
Normal Recording
QUALITY
MID
MID
MID
MID CH/
CH1
CH2
CH3
CH4 FPS/
8
8
8
6
Save & Exit
Global Parameter Audio 1 Rec:
Audio 2 Rec:
Audio 3 Rec:
Audio 4 Rec:
Repeat Rec:
Watermark Emb
Rec Res
Save & Exit
OFF
OFF
OFF
OFF
ON
ON
720 x 240