Digimerge D300 SERIES, Руководство по установке

Страница: 39 / 64

Revision 1.0 39
System Set
SECTION 4
PTZ Menu
Pan / Tilt / Zoom control (for Pelco D or Pelco P Model Cameras only)
1. PAN / TILT / ZOOM : Accesses the PTZ Control for a
camera. Press the
K
and
L
buttons to highlight, and
press the
SEL
button to access PTZ controls:
• LEFT/RIGHT - Pans the camera LEFT/RIGHT
• UP/DOWN - Tilts the camera UP/DOWN
• VOL UP/DOWN - Zooms the camera IN/OUT
• SEL/MENU - Stops viewing / Exits viewing
2. FOCUS: Accesses the Focus Control for a camera.
Press the
K
and
L
buttons to highlight, and press the
SEL
button to access FOCUS controls:
• UP/DOWN - Focuses NEAR/FAR
• SEL/MENU - Stops/Exits Menu
3. SETUP : Setup of the PTZ Cameras. Press the
K
and
L
buttons to highlight, and press the
SEL
button to enter the
SETUP menu:
• CHANNEL: Select the PTZ camera location (Channel 1-4,
1-8, or 1-16 depending on model)
• ID: Set the camera ID (1-7, or OFF).
• Protocol: Select the PTZ Protocol (PELCO-D or PELCO-P)
• Baud Rate: Select the Baud Rate for the Camera (2400,
4800 or 9600 BPS)
• SAVE & EXIT: Saves any changes, and exits to the previous
menu.
PTZ (enter Password)
Pan/Tilt/Zoom
Focus
Setup
PTZ Controller Set
Channel
ID
Protocol
Baud Rate
Save & Exit 1
NO
PELCO-D
2400 BPS