Digifly AIR-BT Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 96

background image

AIR_Manual_506a_ENG_rev_1.pdf

Page 59/96

10.5.1

STARTING TIME (TSTART)



TSTART: Shows the start gate time.

To choose a different start gate time, see section 10.5.5 below.

10.5.2

REMAINING TIME TO START (CSTART)



CSTART (CS): shows time remaining (countdown) until the start gate opens

To choose a different start gate time, see section 10.5.5 below.

10.5.3

EXPECTED ARRIVAL TIME TO START LINE (ESTART)



ESTART (ES): Shows the estimated arrival time to the edge of start cylinder, based on the
average speed relative to the countdown. If the instrument indicates “00:10" (black on
white), it means the pilot will get to the start line with a delay of 10 seconds; if its written “

00:15

" in reverse

mode (white on black), it means the pilot will get to the start line 15 seconds ahead of time (penalty).

10.5.4

REQUIRED SPEED TO START THE CYLINDER LINE (STS)



STS (SS): shows the required speed to get to the start cylinder line in time for gate opening.

10.5.5

CHOOSING A DIFFERENT START GATE TIME IN A COMPETITION ROUTE



Once the route is activated, all these parameters refer to the first start gate time. If you decide to take a

different start (when there are multiple start gates), you need to short press the

button once -on any of the

navigation pages (it won’t work from the “INFO GPS” page)- in order for the values to update to the new start

gate time. Every time you short press the

button, you will move one clock forward and, if you are on the last

one, you will jump back to the first one.

10.6

SKIP WAYPOINT SHORTCUT



The “Skip Waypoint” function of a route (no shortcut - from “Info GPS” page) is explained on paragraph 3.9.8



The Digifly AIR also has a shortcut for this function, from any of the navigation pages. In order to activate it, the
"Skip Waypoint Shortcut" parameter (ADVANCED SETUP \ n 24 SKPW) needs to be set to ON.

Keep in mind that this will change the functions of some buttons:

With the parameter set to OFF = Shortcut disabled (default), LONG PRESS the

button changes the volume

level and LONG PRESS of the

button sets the A2 altimeter to zero.

However, with the parameter set to ON = Shortcut enabled and, when a route is activated both for competition

or XC, LONG PRESS the

and

buttons, will respectively work as skipping a waypoint back and forward

buttons, without having to go to the Info GPS page first.

«
...
57
58
59
60
61
...
»

Содержание AIR-BT

































































































Отзывы:

Нет отзывов

Похожие инструкции для AIR-BT

Бренд: Jensen Страницы: 2

Бренд: X-Trax Страницы: 6

Бренд: Eagle Tree Systems Страницы: 6

Бренд: Maxcom Страницы: 16

Бренд: Garmin Страницы: 2

Бренд: WANWAY TECH Страницы: 10

Бренд: Here Страницы: 3

eXplorist 200 - Hiking GPS Receiver

Бренд: Magellan Страницы: 84

Бренд: Garmin Страницы: 16

Бренд: Royal Страницы: 80

Бренд: LIGHTNING GPS Страницы: 2

Бренд: Livoo Страницы: 8

USB GPS Dongle ND-100

Бренд: Globalsat Страницы: 5

BI 820 TREK OBD

Бренд: BITREK Страницы: 18

Бренд: UniGuard Страницы: 8

SMALLTRACK MOTOS

Бренд: MARLINK Страницы: 2

Бренд: Kingwo Страницы: 17

Бренд: Kingwo Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды