Digifly AIR-BT, Руководство пользователя

Страница: 7 / 96

AIR_Manual_506a_ENG_rev_1.pdf Page 7/96
2 GETTING STARTED
2.1 CONNECTIONS, SENSORS and AIR MANAGEMENT SOFTWARE
 Main Features :
o
Dual purpose mini USB socket allows the Digifly AIR to be recharged with the supplied Digifly 5v charger and,
additionally, to be connected to a personal computer or Mac for configuration & flight data management.
o
Micro SD card slot; use Class 10 cards with 8 to 32GB formatted FAT32.
o
Bluetooth System -AIR BT model only- for wireless communication with other electronic devices
o
Integrated Digi-FlyBox to send its Telemetry to another electronic device, via USB cable or via Bluetooth. This
means sending the information from its sensors through a wireless communication system.
o
GPS receiver - 99 channels
o
Barometer (atmospheric pressure sensor)
o
Integrated anemometer – pitot tube (optional)
o
AHRS – 3-axis inertial platform: Spatial position and direction vectors
relative to the 3 spatial axes.
o
3-axis magnetic compass
o
3-axis accelerometer
o
Free digital worldwide topographic maps.
o
Airspace upload and management.
o
Three Free management software programs both for PC or Mac: AirTools, AirPages and AirUpdater.

Optional Features:
o
Integrated anemometer – Pitot Tube System
2.2 BATTERY

The main power is supplied by an internal rechargeable high capacity lithium battery, which has no memory
effect, so it can be partially recharged, without affecting the battery’s life. It also has a very low self-discharge
rate (about six months) and works very well at low temperatures. A fully charged battery will power the
instrument for over 30 hours: when the battery icon starts to flash, you have approximately 4 hours left of
battery power.

Make sure your instrument is fully charged any time you put store it for a longer period of time (e.g. end of the
flying season) or any time you know you won’t be using it for a while.

To avoid permanent battery damage, you must ensure that it receives a full charge within 3 months of the last
full charge.
2.2.1 BATTERY RECHARGE

To recharge the instrument, connect it to a power source with the USB cable.

Input: DC 5v is required and a 1A is recommended.

The required time for a full charge is about 8 hours.

There are no problems if you leave the vario charging for more than 8 hours, as the vario automatically switches
to a “maintain mode” preventing the battery from being overcharged.

The Digifly AIR’s lithium battery has no “memory effect”, so it can be also partially charged.
miniUSB
microSD slot